Deck Building: Tips and Guidelines

Building a deck can be a challenge. However, you can accomplish it with only basic skills on carpentry and the following essential tips:

1. Get pressure treated wood.

First, you need to use pressure treated wood. As much as possible, do not get regular 2×4’s, as these only give you a deck that can last for only five years. If you do not prefer the idea of getting pressure treated lumber, then consider purchasing a higher quality lumber like redwood or cedar. Oftentimes, pressure treated wood is no longer manufactured with arsenic, which makes it safe and durable. While it’s significantly less expensive to get non-pressure treated lumber, you would have to spend more money in the long run, as you’ll need to repair or replace some parts or your whole deck.

2. Get the right type of screws and nails.

Some deck building codes require stainless steel or a very specific kind of galvanized screw. This is if you’re using pressure treated lumber. Some metal types can corrode the lumber, causing weak joints. So check building codes before building a deck.

3. Measure.

Measure the wood when you’re at the store before the purchase. For example, if you need 12 feet long boards, you need to measure to make sure they’re they’re what you need exactly. If the boards are 9 feet 1 inch long each, you’ll have to spend valuable effort and time cutting off the extra 1 inch from each of the boards.

4. Check with your local codes.

Find out if you must have a building permit, as most cities do require it. Call your local inspection office for you to know the important things you have to do. You will spend more money if you fail to follow local codes. They can be very specific about the size of post you should use, and the types of screws and nails.

5. Do not forget, bark side up!

When installing your deck boards, don’t forget, “bark side up”. Orient each deck board so the end grain growth rings curve upward. Cupping will happen if you don’t do so; and water will pool in the middle and won’t be able to drain off your deck boards.

If you want your deck to last for a long period of time, you must choose materials wisely, especially the wood you’ll use. Get high quality and affordable Dandenong timber supplies from Serano Timber. Check out their website to learn where and how to get this quality wood for building a deck: